Description

2000 SERIES MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE

2000 SERIES MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE

Description:

2000 Series Magnehelic differential pressure gauge has 81 kinds of measurement range to choose from, the precision of 2%. With a wear-free movement, simple structure, reliable, rapid and sensitive indication of a slight positive pressure gas, negative or differential pressure, it also has shock and overvoltage protection functions. Price Magnehelic differential pressure gauge of economic rationality, easy to use, avoiding the measurement of differential pressure gauge liquid evaporation of liquid, frozen and must be level correction and other issues.
2000 Series Magnehelic differential pressure gauge is widely used to monitor fan outlet static pressure, filter resistance, measuring wind speed, ventilation state plates on both sides of the differential pressure measurement, but also for blowing liquid level measurement system monitoring, monitoring mixing ratio of gas control, air monitoring of blood pressure, and respiratory pressure in medical equipment and devices.

Specifications

Service : Air and non-combustible, compatible Gases (Natural Gas option available.).
Wetted Materials : Consult Factory.
Housing : Die cast Aluminum Case and bezel, with acrylic cover, Exterior Finish is coated gray to Withstand 168 hour Salt Spray Corrosion Test.
Pressure Limits : -20 in Hg to 15 psig.. † (-0.677 to 1.034 Bar Bar); MP option; 35 psig (2.41 Bar), HP option; 80 psig (5.52 Bar).
Overpressure :. Relief Plug Approximately Opens at 25 psig (1.72 Bar), standard overpressure Protection Gages only See Note on Page Catalog.
Temperature Limits : 20 to 140 ° F. * (-6.67 to 60 ° C).
Mounting Orientation :. Diaphragm in Vertical position Orientations Consult Factory for other position.
Process Connections : 1/8 “female NPT Duplicate High and low pressure taps – one pair and one pair back Side.
Weight : 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories : Two 1/8 “NPT Plugs for Duplicate pressure taps, Two 1/8” pipe Thread to Rubber Tubing Adapters and Three adapterswith flush Mounting Screws (Mounting and snap retainer Substituted for Three Ring Adapters in MP & HP Gage Accessories.. )
* Low temperature models available as Special option.
† For applications with High Cycle rate Within Gage Total pressure rating, Next ENGINEERING rating is recommended. See Options Page.
Agency Approval : RoHS. (Note: not RoHS Approved SP models.)
Accuracy : ± 2% of FS (± 3% on -0, -100PA, -125PA, 10 mM and ± 4% on -00, -60PA, -6 mm Ranges), at 70 ° Throughout range F (21.1 ° C) .
Note : May be Used with hydrogen Buna-N diaphragm Order a Pressures MUST be less than 35 psi…
Size : 4 “(101.6 mm) diameter Dial face.